W3vina.COM Free Wordpress Themes Joomla Templates Best Wordpress Themes Premium Wordpress Themes Top Best Wordpress Themes 2012

Categorized | Aquaponic Tips, Featured

How to Build a Vertical Aquaponics System

Imagine credit: Ryan Somma

Imagine credit: Ryan Somma

Are you trying to figure out how to build a vertical aquaponics system in your backyard? If so, then the process can be pretty simple to complete. Aquaponics Systems have become a sensational buzz amongst enthusiastic gardeners. You can convert a small area of land into a scintillating garden or fish tank in no time using customized aquaponics strategies.

According to experts, a vertical aquaponics system can be established within a small space of 3ft x 5ft. From this very small area, you can amuse over an yield all year round! Doesn’t this sound enticing and exceptionally useful?

A Basic Definition

 
By definition, vertical aquaponics systems can be used to grow different types of fishes and vegetables. The columns don’t require any soil or fertilizers. Instead, vertical aquaponics systems can be treated as space-effective and water-effective means of gardening and raising aquatic life. When compared against hydroponic systems, the vertical structures will let you grow twice the number of plants and fishes.

Essential Supplies Needed to Build a Vertical Aquaponics System

 
To build a vertical aquaponics system, you will require the following supplies: plastic cups, 15ft 4-inch PVC pipes, elbows, T-Connectors, drums, aquarium tubing, cable ties, scrap wood, power drills, hole saws, water pumps, air pumps and electrical tape. Similarly, you should choose fishes and plants that would survive in your vertical aquaponics system. Using these supplies, you can build a vertical aquaponics system in few short steps.

The Very First Step

 
First of all, you should cut the PVC pipes into 2 separate 14-inch segments and 14 different one foot segments. The pieces must be measured and cut with lots of care & concern. Now, take the one foot pieces and drill neat three inch holes.

The holes must be drilled in 13 one foot pieces. And, in one of the 1-foot pieces you should drill a small 1-inch hole. The hole should be drilled more towards the sides. Label the PVC pipe with the 1-inch hole and store it separately.

Establishing a Strong bond

 
Moving on, it’s time to assemble the PVC pipes together. You should take the 14-inch pieces and connect them using an elbow. The elbows should be taped neatly with the PVC pipe. Conversely, take the one foot pieces and connect them to form a long tube.

To create a clean pattern, you must make use of the T-shaped connectors. Once you are done, you should add the last piece and close the line of one foot PVC pipes.

Attaining the Right shape

 
In most cases, the PVC pipes would be arranged to form a closed rectangle. Irrespective of the shape you choose, remember to check if the PVC pipes are aligned correctly and connected without any gaps. In one end, you must assemble the drain.

The Complicated Part!

 
Consequently, you should make holes in the base of 12-plastic cups. These cups must be placed on top of the PVC-drilled pipes. Above all, the entire structure must be placed on top of the plastic drums, with the drainage unit right above one barrel.

In this barrel, you should assemble the water pump and air pump. The air and water pumps can be used to add fishes into the vertical aquaponics system.

Leave a Reply

.

List of Videos

  • Wood Chips + Plants = SuperSized Vegetables

    Wood Chips + Plants = SuperSized Vegetables
  • Winter Aquaponics Care

    Winter Aquaponics Care
  • Introduction to Aquaponics

    Introduction to Aquaponics
Read More

Disclosure: The owner is an affiliate of product links promoted on this website and may earn a commission on sales.

Copyright © 2017 www.aquaponicsculture.net. All Rights Reserved.